Language
中文
GGD AC Low Voltage Switchgear
GGD type AC low voltage distribution cabinet is suitable for power plants, substations, mining enterprises and other power users with AC 50Hz, rated working voltage 380V, and rated working current up to 3150A in distribution systems. It is used for power conversion, distribution, and control of power, lighting, and distribution equipment.
Category：
High And Low Voltage Switchgear
Keywords：
High & Low-Voltage Complete Division
Tel：
GGD AC Low Voltage Switchgear
DETAIL
Product Introduction
GGD type AC low voltage distribution cabinet is suitable for power plants, substations, mining enterprises and other power users with AC 50Hz, rated working voltage 380V, and rated working current up to 3150A in distribution systems. It is used for power conversion, distribution, and control of power, lighting, and distribution equipment.
Structural Characteristics And Functions
The cabinet body adopts the form of a universal cabinet, and the framework is partially welded and assembled with 8MF cold-formed steel. The framework parts and special supporting parts are supplied by designated steel production factories to ensure the accuracy and quality of the cabinet body.
There are different numbers of heat dissipation slots at both ends of the cabinet. When the electrical components inside the cabinet heat up, the heat rises and is discharged through the upper slot. Cold air is continuously replenished into the cabinet through the lower slot, forming a natural ventilation channel from bottom to top for the sealed cabinet, achieving the purpose of heat dissipation.
The cabinet door is connected to the frame with a rotary movable hinge, making it easy to install and disassemble. The folding edge of the door is embedded with a mountain shaped rubber strip. When opening the door, the strip between the door and the frame has a certain compression stroke, which can prevent direct collision between the door and the cabinet body and also improve the protection level of the door.
Technical Parameter
|
Model |
Rated current(A) |
Rated short-circuit breaking current(kA) |
Rated short time withstand current(IS)(kA) |
Rated peak withstand current(kA) |
|
|
GGD1 |
A |
1000 |
15 |
15 |
30 |
|
B |
600(630) |
||||
|
C |
400 |
||||
|
GGD2 |
A |
1500(1600) |
30 |
30 |
63 |
|
B |
1000 |
||||
|
C |
|
||||
|
GGD3 |
A |
3150 |
50 |
50 |
105 |
|
B |
2500 |
||||
|
C |
2000 |
||||
previous page
next page
previous page
next page
Related products
High And Low Voltage Switchgear
-
KYN61-40.5 Armored Metal Enclosed Switchgear
KYN61-40.5 armored movable AC metal enclosed switchgear is suitable for three-phase AC 50Hz power systems, used to receive and distribute electrical energy, and to control, protect, and detect circuits.
-
KYN28A-24 Armored Removable AC Metal Enclosed Switchgear
KYN28A-24 armored movable AC metal enclosed switchgear is the latest generation of medium voltage AC metal enclosed switchgear and control equipment developed by our company.
-
KYN28A-12 Armored Removable AC Metal Enclosed Switchgear
KYN28A-12 armored removable AC metal enclosed switchgear is a complete set of power distribution device for 3-12KV three-phase AC 50Hz single bus breaking system,
-
YBM Prefabricated Substation
YBM prefabricated transformer substation, also known as European box type transformer substation, is a compact complete power distribution device that integrates high-voltage electrical appliances, power transformers and low- voltage electrical equipment.
-
MNS AC Low-voltage Switchgear
MNS low-voltage withdrawable switchgear is suitable for power generation and supply systems with AC 50Hz and rated working voltage of 380V and below, such as power generation, transmission and distribution, petrochemical departments, factories and mining enterprises, building power supply and other industries.
-
GCS AC Low-voltage Draw Out Switchgear
GCS is suitable for low-voltage distribution systems in power plants, substations, petrochemical departments, factories, mining enterprises, hotels, and high-rise buildings. It consists of power distribution and motor control centers, capacitor compensated motor control centers, and capacitor compensated energy conversion, distribution, and control.
-
GGD AC Low Voltage Switchgear
GGD type AC low voltage distribution cabinet is suitable for power plants, substations, mining enterprises and other power users with AC 50Hz, rated working voltage 380V, and rated working current up to 3150A in distribution systems. It is used for power conversion, distribution, and control of power, lighting, and distribution equipment.
-
Cooper Edison LSN
Cooper Edison LSN is a new generation of low-voltage switchgear equipment carefully developed by the Edison Electric Research and Development (Shanghai) Center of Cooper Power System, which integrates Cooper Industry's century long experience in distribution system design and production based on the constantly developing low-voltage distribution system requirements of the power grid. This equipment is suitable for three-phase AC 50-60Hz control and distribution systems of 690V and below. As a low-voltage motor control and power distribution center, it can be widely used in power plants, substations, operating enterprises and other power users.
-
Schneider BlokSeT 5000
· Continues Schneider Electric's advanced technical experience in the field of low-voltage electrical and low-voltage complete sets · Tailored to meet the needs of the Chinese market and customer usage habits · Suitable for applications such as distribution protection, motor start&protection, and reactive power compensation
Ring Main Unit
-
Dis Sub-12 Environmental protection gas switchgear
The problem of gas leakage and pollution can be solved by replacing sf6 with safe and environmentally friendly mixed gas in gas tank. It has high level of operation security and is used as the core unit of distribution network.
-
Dis Sub-12 Compact fixed air-insulated switchgear
Dis Sub-12 Series of Compact fixed air-insulated switchgear is a new generation of miniaturized, modular.scalable, maintainable, environmental metal switchgear, which has the main feature that the main circuit withthree-phase vertical layout, the three lsolation switch and fixed vacuum circuit breaker function together, Thisequipment is widely used in 3-12kV three-phase AC 50Hz power system, suitable for box-type substation.ring network distribution system.
-
Dis Sub-12 SF6 Gas Insulated Switchgear
Dis sub ring main unit series are gas insulated & enclosed metal switchgear which are all for independent research and development productions.
New Energy
-
Energy storage
Connect photovoltaic, Charging station and power grid to form an integrated system of optical storage and charging;
-
Photovoltaic
Photovoltaic power generation is a technology that converts light energy directly into electrical energy by using the photovoltaic effect of semiconductor interface. It is mainly composed of solar panels (components), controllers and inverters, and the main components are composed of electronic components. After the solar cells are packaged and protected in series, a large area of solar cell modules can be formed, and then combined with the power controller and other components to form a photovoltaic power generation device.
Online consultation
Add: Changfeng Industrial Park, Pingshui Town, Shaoxing
Phone：+8613957536561
WhatsApp：+8613957536561
E-mail：hongbo@zjhbdlkj.com